COMPARATIVE ANALYSIS USES WEIGHTED PRODUCT (WP) AND SIMPLE ADDITIVE WEIGHTING (SAW) METHODS IN THE BEST GRADUATION SELECTION SYSTEM

  • Agus Sidiq Purnomo Teknik Informatika, Fakultas Teknologi Informasi, Universitas Mercu Buana Yogyakarta
  • Anief Fauzan Rozi Sistem Informasi, Fakultas Teknologi Informasi, Universitas Mercu Buana Yogyakarta
Keywords: Decision Support System, Best Graduate Students, WP, SAW, RSD

Abstract

Determination of students in the Study Program of the Information System of Mercu Buana University in Yogyakarta is still in the process of the decision. This is because it has not maximized the use of technology to use existing data in decision making. This assessment uses 6 criteria that are used as parameters in conducting experiments, in order to make the right decisions in this study, namely Multiple Attribute Decision Making(MADM) Simple Additive Weighting (SAW) and Weighted Product (WP). Based on the data that has been tested using the system, the system can be used properly by ranking results based on the highest value. The test results for the speed of access time obtained values of 1362.90 ms for SAW and 672.60 ms for WP. While the test results using Relative Standard Deviation (RSD) obtained a value of 8,2004 for SAW and 10.1868% for WP. In this case using the WP method is more because it is more optimal.

Downloads

Download data is not yet available.

References

Bajandoh, F. H. & Hidayati, R., 2018. Sistem Pendukung Keputusan Untuk Menentukan Siswa Lulusan Terbaik Dengan Menggunakan Promethee (Studi Kasus SMA Negeri 3 Pontianak). Jurnal Coding, Vol. 06, No. 03 (2018), pp. 227-236.
Kusrini, 2007. Konsep dan Aplikasi Sistem Pendukung Keputusan. Yogyakarta: Andi.
Kusumadewi, S., Hartati, S., Harjoko, A. & Wardoyo, R., 2006. Fuzzy Multi- Atribute Decision Making (Fuzzy MADM). Yogyakarta: Graha Ilmu.
Lailiyah, S., Salmon & Haeda, N., 2016. Sistem Pendukung Keputusan Menentukan Anak Asuh Pena Prestasi Menggunakan Metode Saw (Simple Additive Weighting) Pada Lembaga Amil Zakat Dana Peduli Ummat Kalimantan Timur. Sebatik, 15(1), pp. 25-30.
Rini, P. P., Dedi & Riyanti, N., 2015. Sistem Pendukung Keputusan Pemilihan Dosen Terbaik Berbasis Web Dengan Metode SAW (Simple Additive Weighting) (Studi Kasus: STMIK Global Tangerang). Jurnal SISFOTEK Global, Vol. 5, No. 2, September 2015, ISSN : 2088 – 1762, pp. 100-108.
Savitha, K. & Chandrasekar, C., 2011. Vertical Handover decision schemes using SAW and WPM for Network selection in Heterogeneous Wireless Networks. Global Journal of Computer Science and Technology, Vol. 11 No. 9, Version 1.0 May 2011, ISSN : 0975-4172, Print ISSN: 0975-4350, 11(9), pp. 18-24.
Septian, M. R. N. & Purnomo, A. S., 2017. Sistem Penilaian Pegawai Menggunakan Metode Fuzzy Multiple Attribute Decision Making (FMADM) dan Weighted Product (WP). Jurnal Multimedia & Artificial Intelligence (JMAI), Vol. 1, No. 1, ISSN : 2580-2593, 1(1), pp. 27-33.
Setyawan, A., Arini, F. Y. & Akhlis, I., 2017. Comparative Analysis of Simple Additive Weighting Method and Weighted Product Method to New Employee Recruitment Decision Support System (DSS) at PT. Warta Media Nusantara. Scientific Journal of Informatics, Vol. 4, No. 1, May 2017, e-ISSN : 2460-0040, p-ISSN : 2407-7658, pp. 34-42.
Sugiyono, 2014. Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.
Turban, E., Aronson, J. E. & Liang, T. P., 2005. Decision Support Systems and Intelligent Systems (Sistem Pendukung Keputusan dan Sistem Cerdas), Edisi 7. Jilid 1. Yogyakarta: Andi Offset.
Wijaya, A. H. & Mustafidah, H., 2015. Sistem Pendukung Keputusan Untuk Menentukan Lulusan Mahasiswa Terbaik Dengan Menggunakan Metode Simple Additive Weighting (SAW) Di Fakultas Teknik Universitas Muhammadiyah Purwokerto. Purwokerto, s.n.
Yoni, D. C. & Mustafidah, H., 2016. Penerapan Metode WP (Weighted Product) Untuk Pemilihan Mahasiswa Lulusan Terbaik Di Fakultas Teknik Universitas Muhammadiyah Purwokerto. JUITA, Vol. IV, No. 1, Mei 2016, ISSN:2086-9398, IV(1), pp. 22-27.
sebatik snsebatik stmik wicida samarinda
Published
2019-06-01
How to Cite
Purnomo, A. and Rozi, A. (2019) “COMPARATIVE ANALYSIS USES WEIGHTED PRODUCT (WP) AND SIMPLE ADDITIVE WEIGHTING (SAW) METHODS IN THE BEST GRADUATION SELECTION SYSTEM”, Sebatik, 23(1), pp. 44-52. Available at: https://jurnal.wicida.ac.id/index.php/sebatik/article/view/442 (Accessed: 5June2020).
Issue
Vol 23 No 1 (2019): JUNI 2019
Section
Articles

The copyright of this article is transferred to SEBATIK and STMIK Widya Cipta Dharma, when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the SEBATIK. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to SEBATIK. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.